Chloe hydro test and car rig
transpixel
transpixel Chlo on the go, all buckled in. transpixel
transpixel
transpixel
transpixel With two turnbuckles connected to unistrut and a strap over the boiler, the locomotive is one with the car. transpixel
transpixel
transpixel
transpixel Close up of the transport track and hardware transpixel
transpixel
transpixel
transpixel Wheeled out of the car on the transfer track.  You can see the second track here as well.   The two are slightly offset to give more room on the locomotive side. transpixel
transpixel
Chlo on the go, all buckled in.
With two turnbuckles connected to unistrut and a strap over the boiler, the locomotive is one with the car.
Close up of the transport track and hardware
Wheeled out of the car on the transfer track. You can see the second track here as well. The two are slightly offset to give more room on the locomotive side.
transpixel
transpixel Chloe is backed out of the car on the transfer track. transpixel
transpixel
transpixel
transpixel Gerry preparing the hydrostatic pump. transpixel
transpixel
transpixel
transpixel Manually filling filtered water to the top of the dome, using the second safety hole as a vent. transpixel
transpixel
transpixel
transpixel connecting to the steam dome. transpixel
transpixel
Chloe is backed out of the car on the transfer track.
Gerry preparing the hydrostatic pump.
Manually filling filtered water to the top of the dome, using the second safety hole as a vent.
connecting to the steam dome.
Powered by Gallery v1.4.4-pl4